Netgear Extender Not Working Post Update? Fix It Now!

If your Netgear WiFi range extender isn’t working post firmware update, then its major reason is a wrong firmware file. There is a high possibility that you uploaded the incorrect firmware file on your range extender which has resulted in such a serious issue. Know that this needs be addressed as soon as possible.

If we try to be honest, then the only remedy is to delete the current firmware file (the wrong one) by accessing the mywifiext URL. Therefore, do the needful. The firmware update instructions can be checked from the user manual and if you’ve found them difficult to follow, you can simply check out the next section.

Re-Update the Netgear Extender Firmware

To update the firmware of your Netgear extender once again, you are suggested to connect your device to its network using an Ethernet cable. Once done, go through the below given instructions:

  • Access the extender’s admin page using the correct web address ( or mywifiext.local).
  • You should now log in using the default admin details.
  • Very soon, when the dashboard of the extender shows up, select Firmware Update under Administration.
  • This time, we suggest you download the correct firmware file for your Netgear extender according to the model number you own.
  • On the Firmware Update page, you should select the Choose File option and upload the right firmware file.
  • As soon as the firmware gets updated, there are chances that the extender will resume working.

This is how you can re-upload the correct firmware file on your range extender. This is to inform you that you can also flash the firmware via the TFTP client. And do not forger that you have to use the mywifiext.local address for iOS because the mywifiext not working error will show up otherwise.

Solutions: Netgear Extender Not Working after Firmware Update

The steps to be followed in case your Netgear extender does not resume working even after flashing the correct firmware version are written below:

1.Restart the Extender

Unplug your WiFi extender after detaching all the cables connected to its hardware. Make sure that you keep extender in the rest mode for a few minutes. This will provide it with some time to rest and get rid of technical glitches. Power up your extender after connecting it to its respective outlet, and see whether it starts working for you or not.

2.Reset the Extender (30-30-30 Reset)

The last thing we recommend doing is performing a 30-30-30 reset of your Netgear extender. This reset approach demands nothing special but 3 times reset of your WiFi extender. The reset process is supposed to be performed 3 times with a gap of 30 seconds. Here’s how you can complete the 30-30-30 reset of your WiFi range extender:

  • Check that your extender isn’t connected to any device present in your home network.
  • If not, then you may proceed to locate its Reset button.
  • The Reset button is generally located on the back or bottom panel of the range extender.
  • Once found, press the button using a pointed object and hold it for 7 seconds.
  • As soon as the light turns solid red, wait for 30 more seconds and repeat the above steps 2 more times.

All the settings of your extender will return to their default values. It means the password will be password, and the user name will become admin. Also, the SSID will become Netgear_ext. Therefore, set up the extender again using the Nighthawk app or the manual method.

The Conclusion

Here ends our troubleshooting guide explaining what to do if your Netgear extender refuses working after a firmware update. We are anticipating that the given hacks have worked in your favor and now you have fixed the issue.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button